15Dies Watch Back Case Opener Die Fit Breitling Removal Tool Opener Kit, Watch Back Cover Opener Kit for Bottle Opener Removal Repair Tool, (15 Molds)

Items included:*1 Set of Case Back Bottle Opener Kit (15 Molds)Description:Bre 1: 19.12mmBre 2: 23.45mmBre 3: 25.90mmBre 4: 26.00mmBre 5: 26.75mmBre 6: 26.80mmBre 7: 29.5mmBre 8: 33.36mmBre 9: 34.60mmBre 10: 35.75mmBre 11: 36.03mmBre 12: 36.8mmBre 13: 37.7mmBre 14: 42.02mmBre 15: 43.72mmHow to Remove the Watch Band:1. Make Sure You Are on a Flat Surface (Table or Table). Place the Watch on a Cloth or Towel to Avoid Scratching.2. Take the Table Below. Press One End of the Spring Rod from the Back of the Watch, Use the ""Spring Rod Remover Tool"", and Use the Spring Rod to Remove the Fork (Fork) End of the Tool Between the Lug and the Strap. the Spring Rod Removal Tool Has a Tool That Will Grab the Ridge and Allow It to Compress.3. Apply a Slight Pressure to the Strap (Away from the Lug) to Depress the Spring Lever. at the Same Time, Applying some Downward Pressure, the Spring Rod Will Pop out.Once Again, You Just Took the Table Band from the Case.How to Install the Strap:1. Make Sure You Are on a Flat Surface (Table or Table). Place the Watch on a Cloth or Towel to Avoid Scratching.2. Insert the Spring Strips into the Holes on Both Sides of the Belt. Push Them All in and Center Them Inside the Strap.3. Install the Short End of the Strap (the Side of the Buckle Is at 12 O'clock). Insert the End of the Spring Rod into the Hole in the Case Lug from the Back of the Watch. Use the Spring Lever Removal Tool (Forked ""Fork"" End) to Press the Other End of the Spring Rod into the Hole in the Lug. Make Sure That Both Spring Bars Are in Their Holes by Pulling Them Slightly, or That the Straps Are Coming off the Watch. Give It a Little Drag to Make Sure It Is Safe.4. Repeat the Above Steps on the Other Side. the Long End of the Strap (with Holes) Is at 6 O'clock.

• 【High Quality Material】Bottom cap bottle opener kit is made of high quality stainless steel with aluminum handle and 15 stainless steel molds. The watch back removal tool can be used to open the case of other expensive watches.
• 【15 Different Sizes】Bre 1: 19.12mm, Bre 2: 23.45mm, Bre 3: 25.90mm, Bre 4: 26.00mm, Bre 5: 26.75mm, Bre 6: 26.80mm, Bre 7: 29.5mm, Bre 8: 33.36 mm, Bre 9: 34.60mm, Bre 10: 35.75mm, Bre 11: 36.03mm, Bre 12: 36.8mm, Bre 13: 37.7mm, Bre 14: 42.02mm, Bre 15: 43.72mm.
• 【Package Includes】Rear Cap Corkscrew Kit for corkscrew removal repair tool. 1 *Bottom Cap Opener Kit (15 Moulds).
• 【Strap Removal Method】Press one end of the spring lever from the back of the watch, and use the "spring lever removal tool" to remove the fork end of the tool between the lugs and the strap. The spring bar removal tool has a tool that grabs the ridge and compresses it. Gently press the strap to depress the spring lever. At the same time, apply some downward pressure and the spring bar will pop out.
• 【How to Remove The Watch Band】Make sure you are on a flat surface (table or table). Place the watch on a cloth or towel to avoid scratching; Take the table below. Press one end of the spring rod from the back of the watch, use the "spring rod remover tool", and use the spring rod to remove the fork (fork) end of the tool between the lug and the strap. Apply a slight pressure to the strap (away from the lug) to depress the spring lever.